You are currently viewing Awesome Arduino Projects for Beginners
  • Post author:

Awesome Arduino Projects for Beginners

 

Hello Everyone…Are you looking to urge into the planet of Arduino and see what you’ll do with this technology? Then lets move towards “Awesome Arduino Projects for Beginners”

Are you looking to urge into the planet of Arduino and see what you’ll do with this technology?

Below, there are projects for beginners perfect for a coffee level of programming.

These projects should offer you a basic idea of the potential of Arduino and perhaps you’ll find inspiration to find out more about this versatile platform.

Arduino is an open-source hardware design, so everyone with enough knowledge can make their own boards.

There also are many beginner’s kits that include an Arduino Board and basic components.

So it include components like sensors, breadboard, relays, controllers, LEDs, jumper wires and motors.

All projects mentioned below use only the foremost basic Arduino components.

So here are “Awesome Arduino Projects for Beginners”

 

#1: The Knight Rider

The Knight Rider is just several LED lights blinking one after another.

It’s one among the simplest Arduino projects you’ll find. Before you begin , prepare the subsequent components:

  • 10 LED lightsArduino Board
  • 10 x 200Ω or 220Ω resistors
  • Breadboard

Awesome Arduino Projects for Beginners

With this project, you’ll learn to use LEDs for loops which can assist you proceed to more complex projects.

Start with connecting everything together.

Always use a resistor otherwise you can damage your Arduino Board and your LEDs.

Even though everything can work without a resistor, it’s not worth risking your platform.

Take a negative leg of the LED and put it within the negative bar of the breadboard.

Take the positive leg and put within the positive bard of the board.

Then connect the resistors to the LED and to the board with a jumper wire. Do an equivalent for other LEDs.

Now, all you would like to try to to is to upload a program. After everything is completed , the Knight Rider should be working.

You can change its speed and add more LEDs.

Click here for code..

 

#2: PIR Motion Sensor

PIR sensor may be a movement sensor so whenever something moves, it sets bent High.

With this project, you’ll control the High state and therefore the sensitivity of PIR.

During this project, you’ll find out how to use LEDs and a piezo buzzer and the way they will detect motion.

Below, there are the components that you simply will need:

  • Arduino Uno Board
  • PIR sensor
  • Buzzer

Awesome Arduino Projects for Beginners

The first thing you would like to try to to is to urge all the connections right.

You will got to take 5 jumper wires and connect everything.

Keep in mind that you simply should take male-female connectors.

Now, upload the program to your Arduino. Set the frequency to three ,000 Hz.

When everything is completed , you’ll hear the sound (just sort of a blink once you work with LEDs) when your PIR detects the movement.

You can change the delay time to vary the time of the beep.

Click here for code..

 

#3: Arduino Decibel Meter

The aim of the project is to make an Arduino volume meter using LEDs and a microphone.

Here is what you’ll need:

Awesome Arduino Projects for Beginners

You can use any microphone compatible together with your Arduino board that has an analog output.

Moreover, the ultimate result looks best if you’re taking 5 green, 3 yellow and a couple of red LED colors.

All you would like to try to is to attach everything using your Arduino board.

Make sure LEDs and resistors are properly connected to the board.

Take male-male cables and plug the microphone module to the breadboard and you’re done.

Click here for code..

 

#4: Ultrasonic Distance Sensor

With this project, you’ll use a well-liked HC-SR04 ultrasonic sensor to permit your robot avoid obstacles and move in several directions.

When you’re done, you’ll have a tool which will sense the space and display in on a screen.

Here is what you would like to require for this project:

Awesome Arduino Projects for Beginners

Start by making all the connections with the jumper wires. At now , you shouldn’t add your LCD.

Now, take an LCD and connect it accordingly. then , download the library using the Arduino IDE.

Now Just open Sketch – Include Library – Manage Libraries – LCD I2C. And you’re done!

This is a really quick project that provides you the skill necessary to create complex robots.

To make everything easier, it’s recommended to require an LCD with an I2C converter so you simply need 4 cables to attach it to your Arduino board.

The fits loop are going to be the LEDs setup and therefore the other is to regulate the lights.

You can change its sensitivity by changing the worth within the code.

Click here for code..

 

#5: Rainfall Detector

A rainfall detector is one among the foremost useful Arduino projects for beginners.

The detector will beep, so you’ll know that the rain has started. For this project, you’ll need:

Awesome Arduino Projects for Beginners

Basically, the rain sensor may be a simple PCB board that opens traces when raindrops close the circuit.

The special circuitry gives a sign to the digital output pin that you simply can hear.

There is also an analog output pin that you simply can use to read the values from the sensor.

You have full control of the edge for a digital output with the potentiometer on your board.

Use red LED lights to inform you the rain is detected, and you ought to touch the sensor with a hand or squeeze it a touch bit too see the sunshine .

The skin resistance is big and therefore the light are going to be bright.

You can make your rain sensor useful by putting the sensor outside and leaving other parts inside to guard them from the rain.

When the rain starts, you’ll hear the beeping sound.

Click here for code..

 

#6: Arduino Stopwatch Project

With this project, you’ll build an Arduino stopwatch using the only components. you’ll need:

  • Arduino Board
  • LCD with I2C converter
  • Buzzer
  • Potentiometer
  • Jumper wires
  • Breadboard

Awesome Arduino Projects for Beginners

All you would like to try to to is to line the time between 1 and 120 minutes.

After that, it waits for five seconds and counts down. When the time is over, it beeps several times. That’s it.

We hope you’ve got been ready to build a totally working Arduino project with these ideas.

The best thing, you’re not limited to simple projects.

When it involves Arduino, there’s a tremendous community that’s all about sharing.

Many people are happy to share what they did and you’ll find thousands of Arduino projects, both very simple and really complex.

Click here for code..

 

#7: Arduino 7 Segment Display

With this project, you’ll find out how to use a display and the way to properly connect it.

Displays are utilized in many other Arduino projects, so learning the fundamentals are going to be very helpful. you’ll need:

Awesome Arduino Projects for Beginners

One of the simplest ways to attach a display to your Arduino board is to plug it into the breadboard and take male-male cables.

Later on, you’ll be ready to plug male-female connectors to display but it’s quite hard for beginners.

You will also need resistors to attach an LED to Arduino and protect the board from burning,

So you ought to also connect resistors to your display because it’s made from LEDs.

Click here for code..

 

#8: Arduino Relay Project

Even if you’re new Arduino, you’ll control one among your appliances with it.

For example, using this project, you’ll use different components to make a bridge from the Arduino layer to appliances with a high power rating.

For this project, you’ll need:

  • Arduino Uno board
  • Relay board
  • Cable with socket and plug
  • Jumper wires
  • 230V lamp

Awesome Arduino Projects for Beginners

 

You need to organize the socket and therefore the cable by removing the insulation from the cable.

After that, connect the cable to the socket and connect another wire to the socket.

The best appliances to regulate together with your Arduino board are a lamp, a washer , and a motor.

For example, you’ll program your Arduino board in order that it swatches the facility input of your washer off at a particular time of the day.

Click here for code..

 

#9: The Stepper Motor

A stepper motor means a particular motor which will be rotated one step at a time.

You can find this type of motors in robotics, 3D printers, and CNC machines.

Some of them are often very expensive and as a beginner, you don’t need them.

For this project, take the most cost effective stepper motor you’ll find. The motors are available online.

In this project, you’re getting to use 28byj-48 stepper and there are many other projects this motor is suitable for.

It’s easy to attach to the Arduino board. For this project, you’ll need:

  • Arduino Board
  • 28byj-48 stepper motor with driver
  • Jumper wires

Awesome Arduino Projects for Beginners

You will need 6 cables with female-male connectors.

So that you only got to connect the motor to the driving force and that’s it!

For your ease you’ll also add alittle piece of tape on the rotating head to ascertain that it actually rotates.

Click here for code..

 

#10: RGB LED Arduino

The LED that contains 3 LEDs: red, green and blue.are called as RGB.

This RGB can shine in millions of colors and is as easy to use as a regular LED.

The LEDs are perfect for beginners because they are very affordable, easy to use and you can make thousands of Arduino projects with them.

But this LED is one of the most interesting LED type, which is different from other LEDs.

For this project, you will need:

  • RGB LED
  • 3 x 200 – 220Ω resistor
  • Breadboard
  • Jumper wires

Awesome Arduino Projects for Beginners

 

Just connect everything together and you’re done!

To make it light, shine, brighter, you can use foam that comes in boxes to protect shipped items.

Just make some holes for the LED to go in and the foam will start changing its colors.

Click here for code..

check this video to understand more about Arduino board by Make

 

Conclusion:

So …that’s all  !! ..I hope you found this post “Awesome Arduino Projects for Beginners” Useful as well.

Because  I always Love and prefer to write articles that are useful to update our Tech Knowledge

And most importantly don’t forget to Subscribe to my website.

So that you will get the notification whenever I upload a new post may be related with ‘Technology”. Above all

So I request you to stay updated with us ;

If you find these posts useful do comments on which post you like the most and Do Share this post with your Friends and Family…

Please Follow us on Social Media given Below — We”ll share more useful knowledge with you All…Usually in 2 days and Finally Thank you for reading this post 🙂

Have Questions?  Feel Free to contact us at contactus@technicaltracker.com 

“Stay tuned Stay Connected”

Akash Patil

This Post Has 2 Comments

  1. Vratesh Natekar

    Awesome😍 I loved the post specially ultrasonic distance sensor

Leave a Reply